Seismic + Shock Detection:
• Seismic mode: Uses a piezoelectric sensor to detect vibrations and acoustic waves transmitted through solid structures (walls, ceilings, floors) caused by drilling, sawing, chiseling, or even more forceful intrusion attempts. Ajax Systems Support+2osec.nl+2
• Shock mode: Detects impacts, attempts to break locks, or forced entry actions. Additionally, can detect tilt: upon arming, the device memorizes its position; then if it is displaced by more than a configured angle (~5° by default, up to ~25°) it triggers alarm. Useful for things like safes or scenarios where someone might try to move or manipulate the protected structure. osec.nl+3Ajax Systems Support+3FSM+3

Grade 3 Certification (EN 50131-2-8)
Complies with the highest standard for physical intrusion detection (Grade 3) under EN 50131, making it suitable for high-risk installations where resistance to tampering, forced access, and environmental security is critical. Ajax Systems Support+2EPS Vertrieb+2

Superior Line / Fibra Protocol
Uses the Fibra wired communication bus: secure, tamper-resistant, two-way communication with the Ajax Hub. Fibra supports long cable runs, strong signal reliability, authentication, and encryption. Only accredited Ajax Systems partners can sell, install, and configure Superior devices. Ajax Systems Support+2elbudajax.com.pl+2

Wide Communication Range Over Wire
When connected via U/UTP Cat-5 twisted pair cable, the Fibra bus line can span up to 2,000 meters (approx. 6,550 ft) in good cable and installation conditions. Ajax Systems Support+2osec.nl+2

Adjustable Sensitivity & Customization
• Three levels of sensitivity to vibration/impact detection, configurable through Ajax PRO apps. axsystems.sk+2EPS Vertrieb+2
• Tilt threshold configurable (default ~5°, can be set higher) to accommodate different mounting and object types. Ajax Systems Support+1

Temperature & Environmental Monitoring
• Includes a digital temperature sensor. It can trigger an alarm if temperature rises sharply (e.g. +5 °C within 5 seconds), or exceeds a high threshold (e.g. +70 °C) in the enclosure. axsystems.sk+2EPS Vertrieb+2
• Designed for indoor environments only. Operating temperature from approximately −25 °C to +70 °C; humidity operational up to ~95% depending on installation conditions. FSM+2EPS Vertrieb+2

Tamper & Sabotage Protection
• Two tamper switches: one detects opening of cover; the other detects displacement of the device from its mounting surface. Ajax Systems Support+2Ajax Systems Support+2
• Detection of drilling / perforation of the housing via dedicated contacts (Pogo pins), to guard against tampering through the casing. Ajax Systems Support+1

High-security facilities such as bank vaults, safes, data centers, jewellers’ display cases, or storage rooms where intruders might attempt drilling, cutting, or using power tools.

Locations where physical tampering is a real threat: e.g. removing walls, drilling, forced entry through structural panels.

Installations where both seismic detection (vibrations in building structure) and direct shocks/impacts need to be detected.

Environments requiring wired reliability over wireless, long cable runs, secure lines and high resistance to interference, and Grade 3 compliance.

Wired (Fibra) Protocol — communicates via Ajax’s secure Fibra wired bus. Ensures fast and reliable signal transmission, device authentication, and encryption to guard against tampering and spoofing. Ajax Systems Support

Long Line Support — supports cable runs of up to 2,000 meters using U/UTP Cat.5 twisted-pair cable. Ajax Systems Support

Magnet Options — includes both a large magnet (effective up to ~2 cm separation) and a small magnet (up to ~1 cm) to accommodate varying door/window frame designs. Ajax Systems Support

Dual Tamper Protection — two tamper buttons: one for cover opening, one for removal (detachment) from mounting surface. Also, the detector includes perforated parts for secure wire routing and protection against tampering. Ajax Systems Support

External NC Contact Support — allows connection of a third-party normally-closed (NC) wired detector. Useful for integrating additional sensors or contacts. Ajax Systems Support

Quick Alarm Response — when in armed mode, opening of the sensor triggers an alert to the hub within ~0.15 seconds, plus activation of connected sirens and notification to users/security services. Ajax Systems Support

Certified Partner Install Only — the Superior Fibra line is restricted to purchase, installation and administration only by accredited Ajax partners. This ensures professional setup, compliance, and warranty. Ajax Systems Support

Doors and windows in high-security applications (vaults, server rooms, critical infrastructure, etc.) where wired reliability and rapid detection are essential.

Installations where long cable runs are required, or where wireless signals may be weak or undesirable.

Environments where tampering or forced removal of sensors is a risk, and where dual tamper protection is needed.

Systems where integration with third-party NC (normally closed) wired sensors is desirable (e.g. glass break sensors, external door contacts) to expand detection points.

Multi-sensor detection:
  • Opening detection via reed switches & magnet.
  • Shock (vibration) detection — detects impacts or attempts at forced entry.
  • Tilt detection — monitors changes in angle (e.g., windows in ventilation mode), allowing protection even when slightly open. Ajax Systems Support+2ajax.systems+2

External Wired Contact Support: Includes a terminal to connect a third-party NC (normally closed) wired detector, increasing flexibility for integrating additional sensors. Ajax Systems Support+1

Magnets for versatile installation: Comes with both a large and small magnet. The large magnet allows up to ~2 cm gap; the small magnet up to ~1 cm. Provides flexibility depending on frame thickness or mounting constraints. Ajax Systems Support+2Ajax Systems Support+2

Wireless Communication (Jeweller protocol): Secure, two-way wireless link to the Ajax Hub, with encrypted data, instant notification of alarms/events. Open-space wireless range up to 1,200 meters. Ajax Systems Support+2ajax.systems+2

Superior line attributes:
  • Only accredited Ajax Systems partners may sell, install, and manage Superior products. Ajax Systems Support+1
  • Compatible with Fibra and Baseline lines — enabling mixed-technology systems where needed. Ajax Systems Support+1

Customizable settings via app: Users (or installers) can enable or disable individual sensors (shock, tilt, opening), adjust sensitivity, set tilt angle and alarm delay, control LED indicators, etc. Ajax Systems Support+1

Tamper protection & secure mounting: Detects removal from its mounting panel (SmartBracket). Includes holding screw for more secure installation. LED indicator aids in visual confirmation of status. ajax.systems+1

Ideal for high-security projects: commercial premises, institutional buildings, places with higher risk of forced entry or tampering.

Windows, doors, skylights, and vents where tilt protection is needed (i.e. when windows are slightly opened for ventilation).

Situations where standard detectors don’t suffice (e.g. large gaps, thick frames) — thanks to the two magnet sizes and large gap capability.

Environments needing both wired and wireless hybrid systems — external NC detector support allows integrating different detection modes.

Hybrid Wired + Wireless Support
Uses Fibra for wired device connectivity and Jeweller for wireless devices. This allows for a mix of wired detectors, wireless sensors, sirens, etc. Ajax Systems Support+2TSS Group+2

Multiple Communication Channels for Redundancy
Connects via Ethernet and 2G cellular modem (with two SIM card slots) for backup / fallback communication. Ajax Systems Support+1

Photo-verification Capable
Supports MotionCam and MotionCam Outdoor detectors (wireless photo-verification). When triggered, the detectors can take photos which are sent to verify alarms visually. Ajax Systems Support+1

Scalable Device & User Support

• Up to 100 devices (wired + wireless) can be connected. Ajax Systems Support+1

• Up to 50 users TSS Group+1

• Supports up to 32 automation scenarios for custom control behaviors (lighting, locks, leaks, etc.) Ajax Systems Support

• Supports multiple security partitions / areas (around 9 areas / groups) for zoning/security groups. Security-Systems+1

Backup Power & EN 50131 Grading
Can be fitted with a 12 V battery (4, 7, or 9 Ah) in the casing. With a 7 Ah battery, capable of operating 30 wired detectors up to 60 hours on backup power. It meets Grade 3 requirements under EN 50131 when properly installed and powered. Ajax Systems Support+2Ajax Systems Support+2

Suitable for commercial or large residential premises where both wired security (e.g. for doors/windows, electric locks) and wireless sensors are to be used.

Environments needing redundant communication paths (Ethernet + cellular) to ensure that alarm messages reach monitoring stations even if one channel fails.

Facilities that require photo verification of intrusions for evidence (e.g. retail, offices).

Sites where long cable runs for wired sensors are necessary (using Fibra), but also flexibility to add wireless wherever needed.

Ideal for deployments demanding high reliability, backup power, and compliance with higher security Grade standards (EN 50131 Grade 3).